Configuration | Changing Cv Values - marklin Central Station 3 Manual Del Usario

Setting up Functions
Numerous different function symbols from which to select are available
here divided among the three tabs „Light", „Sound", and „Mechanic". In
the example, we tap on the tab „Mechanic" and select the acceleration/
braking delay symbol. The CS3 now replaces the empty placeholder
symbol with the icon for the newly selected action (right image).
Selecting and Testing the Type of Function
You can also determine the way in which the selected action is to be switched: If you
want to be able to turn the action on and off, select „Switching Function" (right image).
„Impulse Function" activates the command for a short moment. You have access to
self-defined function processes with the option „Run Time Function" (left image) (see
the section „Events" starting on Page 27). Tap on the centrally positioned „Test" element
(upper right image) in order to test the newly set up function field.
World of Operation Mode
You can set the desired World of
Operation mode by means of the
drop-down menu „Operation Mode"
on locomotives with the mfx+ decoder.
The mode „Without consumption"
(cab, without simulation of the
operating materials consumption) is
preset. There is also the option „With
consumption" (cab with simulation of
the operating materials consumption)
and the option „Maintenance facility"
(cab with simulation of the operating
materials consumption plus refueling
by means of feedback contacts).
Tap on a function field on the left
side in order to assign a function to
a locomotive. The symbol of the left
side now appears in the middle of
the window. An entry template will
open after that with a tap
of your finger (small image
to the left).
Important: The cab is displayed when you open
the locomotive controller fully to the opposite
edge of the display.

Configuration | Changing CV Values

This is the way to edit individual CV values
Tap on the tab „Configuration" after you have activated the editing mode and after selecting the locomotive to
be edited (see Section „Set Up" on Page 12). In case of a locomotive with an DCC decoder the following user
interface is opened. The „Configuration" tab of an MM decoder is similar. Tip: The blue areas are only intended
for experts. Please change something only when you know what you are doing.
Loading and Storing CV Templates
DCC decoders suitable for
it can also be programmed
on the main track with the
option POM (Programming
on the Main).
Add more CV rows with
„CV Added".
Transfer the contents of a
loaded template file into
the locomotive decoder.
You can change the names
and the values for CVs in the
individual CV rows. You get
access to the entry fields
by tapping on the field in
question.
Tap in the tab „Configuration" on the
two symbols „Save" and „Load" in or-
der to load an existing CV template or
to store a newly created CV template.
After that, a file selection dialog will
open and/or suggest a file name for
storing.
13