Adjusting The Camera - Silent Witness Cardan Guía Rápida

Adjusting the camera

1
Apply 11-16 VDC or 17-32 VAC power to the camera and
monitor the video signal.
2
Loosen the three screws that lock the gimbal assembly in place
(see Figure 5).
3
Adjust the camera carrier to the desired view (see Figure 5).
4
Tighten the three screws to lock the gimbal assembly in place.
5
Focus the lens. Refer to the Lens Quick Install Guide that came
with the lens (blue box).
Note Refer to the TOP label on the lens holder to maintain the
correct picture orientation.
6
To adjust the camera direction, view angle and focus, connect
the service monitor cable (supplied) to the video monitor
output.
6