Adjusting The Backlight Compensation; Next Step - Silent Witness Cardan Guía Rápida

the vertical phase while switching between two cameras, turn the
Line lock adjustment screw on one camera until there is no vertical
roll. See Figure 7 for color cameras and Figure 8 for monochrome
cameras. The wide dynamic range cameras use line lock adjustment
buttons to adjust the vertical phase (see Figure 9).
Note If the phase cannot be adjusted to prevent picture roll,
reverse the power polarity.

Adjusting the backlight compensation

The backlight compensation (BLC) adjusts the electronic shutter
speed of the camera based on the light levels in specific areas of
the scene. This adjustment provides better image quality for scenes
that are unevenly lit.
To adjust the BLC, set the BLC switch to ON (see Figure 7 for
color cameras and Figure 8 for monochrome cameras). Center
window weighted.

Next step

Install the enclosure cover. Refer to the Housing Quick Install Guide
that comes with the housing (red box).
17