Descargar Imprimir esta página

Installation Instructions - Cequent Performance Products Fultron GB44 Instrucciones De Instalación

Bote/guía de rodillo

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instr uctions
BOAT ROLLER GUIDE MOUNTING: BGR20
See Fig. 4
1) Using a Phillips-head screwdriver, insert a self-tapping screw and lock-washer
into the LOWER hole of the mounting tube and tighten into place by hand
(CAUTION: Do Not Over Tighten).
2) Place the carpeted roller over the mounting tube.
3) Insert the Fulton cap into the top of the mounting tube. Align the hole in the
cap with the hole in the mounting tube. Insert and tighten by hand a self-
tapping screw and lock washer to hold the roller in place.
4) Determine approximate desired location of mounting tube.
5) Put U-bolts through saddle clamps.
6) Position mounting tube on top of trailer frame and slide U-bolts (with clamps)
over the tube on each side of the frame.
7) Select holes in mounting straps that best fit your trailer frame tubing. Place
mounting straps over U-bolts with the flat surface of the straps against the
frame.
8) Install 3/8" lock washer and 3/8" hex nut on each end of the U-bolts and finger
tighten.
9) Place a silver vinyl cap on the bottom end of the tube.
10) Adjust the mounting tubes so that the guides lightly contact the sides of the
boat and tighten the mounting hardware to 15 ft-lbs of torque.
11) Repeat all steps above on the other side.
NOTE: Some adjustment may be required the first time you unload the boat.
Check hardware for proper tightness every time the trailer will be in use. Tighten if necessary.
Limited Warranty. Cequent Performance Products, Inc. ("We" or "Us") warrants to the original consumer purchaser only ("You") that the product
will be free from material defects in both material and workmanship for a period of five years for Bulldog® and Fulton® products and one
year for the Pro-Series® products, ordinary wear and tear excepted; provided that installation and use of the product is in accordance with prod-
uct instructions. There are no other warranties, express or implied, including the warranty of merchantability or fitness for a particular purpose. If
the product does not comply with the applicable limited year warranty, Your sole and exclusive remedy is that We will replace the product without
charge to You and within a reasonable time or, at our option, refund the purchase price. This warranty is not transferable.
Limitations on the Warranty. This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect, misuse, or as a
result of any accident or in any other manner; (c) damage from misapplication, overloading, or improper installation, including welds; (d) improp-
er maintenance and repair; and (e) product alteration in any manner by anyone other than Us, with the sole exception of alterations made pursuant
to product instructions and in a workmanlike manner.
Obligations of Purchaser. To make a warranty claim, contact Us at 47912 Halyard Dr. Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify
the product by model number, and follow the claim instructions that will be provided. Any returned product that is replaced or refunded by Us
becomes our property. You will be responsible for return shipping costs. Please retain your purchase receipt to verify date of purchase and that
You are the original consumer purchaser. The product and the purchase receipt must be provided to Us in order to process Your warranty claim.
Remedy Limits. Repair or replacement is Your sole remedy under this limited warranty or any other warranty related to the product. We shall not
be liable for service or labor charges incurred in removing or replacing a product or any incidental or consequential damages of any kind.
Assumption of Risk. You acknowledge and agree that any use of the product for any purpose other than the specified use(s) stated in the product
instructions is at Your own risk.
Governing Law. This limited warranty gives You specific legal rights, and You also may have other rights which vary from state to state. This
limited warranty is governed by the laws of the State of Michigan, without regard to rules pertaining to conflicts of law. The state courts located in
Oakland County, Michigan shall have exclusive jurisdiction for any disputes relating to this warranty.
Maintenance
Limited War ranty
GB150
GB44
Warning: Failure to follow these warnings and instructions may
( c ont .)
result in property damage, serious bodily injury, and/or death.
Fig. 4
U-bolt - 3/8"
Saddle Clamp
Silver Vinyl
Cap
BGR20
F3818(A-18734) 03/13
Fulton Cap
Carpet Roller
Mounting
Tube
Lock Washer
Self-tapping
Screw
Mounting Strap
Lock Washer - 3/8"
Hex Nut - 3/8"
47912 Halyard Dr. Suite 100
Plymouth, MI 48170 USA
800/632-3290
www.cequentgroup.com

Publicidad

loading

Este manual también es adecuado para:

Fultron gb150Fultron bgr20