Solar-powered Transmitter:
Solar panel
Note:
The solar-powered temperature transmitter uses solar cells to
charge the rechargeable batteries (2 x AAA rechargeable batteries).
Those rechargeable batteries cannot be replaced.
SOLAR TRANSMITTER OPERATION MODES
Important:
Users need to press the reset key to activate the solar transmitter
and link the transmission to the Solar Station (receiver).
It is important to allow sufficient light to reach the solar panel while
activating the solar transmitter. Make sure the lights are on in the setup
room and the solar panel is facing a 60W light bulb or brighter - do not
cover with hands or other objects.
Solar transmitter RESET key:
The solar transmitter has 3 operations modes:
Normal Operation Mode:
This mode occurs when the battery voltage is higher than 2.5V.
The transmitter will measure and transmit the temperature data to
the solar wall clock every 8 seconds.
The environment brightness is checked every 5 seconds
If a dark environment is detected, it will measure and transmit the
temperature every 16s.
Remote transmission of outdoor
temperature to the Solar Clock by 915
MHz signals
LCD displays outdoor temperature data
Recharge batteries by solar-powered cells
Wall mounting case
RESET key
Note: only use a small pointed pen to
press the RESET key to re-active the
transmitter into Normal Operation Mode.
2