Descaling; Storage - Silvercrest SKMK 1200 A1 Instrucciones De Servicio

3. Insert the cleaned seal or a new one.
4. Before using the device again, reinsert
the blade assembly 27.
Deep steamer basket
1. Pull seal 4 off the underside of the deep
steamer basket 3.
2. Insert the cleaned seal 4 or a new one
in the deep steamer basket 3. Ensure
that the seal is in continuous contact
with the surface without any waves.
Lid of the blender jug
1. Pull seal 31 off the underside of the lid
of the blender jug 32.
2. Insert the cleaned seal 31 or a new one
in the lid for the blender jug 32.

15.5 Descaling

When steaming with hard water, limescale
may build up on the parts used, especially
in the blender jug 5.
Normal cleaning
In most cases, the limescale deposits are re-
moved by cleaning in the dishwasher or by
hand.
Slight limescale deposits
1. Remove slight limescale deposits, which
cannot be removed with normal clean-
ing by hand or in the dishwasher, with
a cloth on which you put some house-
hold vinegar.
2. Rinse with clear water.
60 GB
Major limescale deposits
CAUTION:
3
1. Prepare a mixture of 50% white house-
2. Fill this mixture into the blender jug 5 or
32
3. Allow the mixture to react for 30 minutes.
NOTE: more extended reaction periods do
not improve the limescale deposits but may
damage the parts permanently.
4. Rinse with clear water.
5. Allow the parts to dry completely before

15.6 Storage

•
Do not use commercially available des-
caling agent, not even glacial acetic
acid or vinegar essence. Use the follow-
ing gentle method.
hold vinegar and 50% boiling water.
put other furred-up parts into a contain-
er with this mixture.
using them again.
Store the device protected against dust
and dirt and out of the reach of chil-
dren.