Publicidad
Electrical Specifications
! !
Power 120VAC .
50/60 H
2.
300 WATTS.
Tools Required: Phillips Head Screwdriver.
English
Ceiling Support
Wires(14 AWG wire
Energía 120VAC.
50/60 H
.
2
300 VATIOS.
Las herramientas requirieron: Destornillador principal
Español
Phillips.
Alambres de la ayuda del techo
(14 de alambre del AWG Min.)
Puissance 120VAC.
50/60 H
.
2
300 WATTS.
Outils requis : Tournevis phillips.
Français
Fils de soutien de plafond (14 de fil d'A.W.G. mn)
Energie 120VAC.
50/60 H
.
2
300 WATT.
Werkzeuge erfordert: Kreuzkopfschraubenzieher.
Deutsch
Decken-Stützdrähte (14 AWG-Lehredraht Min.)
Poder 120VAC.
50/60 de H2.
300 WATTS.
As ferramentas exigiram: Chave de fenda principal de
Portuguese
Phillips.
Fios da sustentação do teto
(14 de fio Calibre de diâmetro de fios Min.)
Potere 120VAC.
50/60 di H2.
300 WATT.
Gli attrezzi hanno richiesto: Cacciavite phillips. Legare
Italiano
di sostegno del soffitto
(14 del legare dell'AWG min.)
Igloo Dome
min.)
Mechanical Options
1. Air ow sensor available to be combined with camera output systems
to monitor the e ectiveness of air lter. If improper air ow is detected,
sensor will send alarm. If user by passes air ow sensor, air lter should
be changed approximately every 6 months (depending on monitoring
environment).
2. The Igloo Dome incorporates an automatic cool-down safety
precaution system which deactivates the power of both the camera and
cooling system when internal temperatures exceed 167°F (75°C). Once
safe operating conditions resume, the camera and cooling system will
reactivate.
3. Condensation and water run-o is a by product of the Igloo Dome's
cooling system. To prevent damage to the internal electrical
components, the Igloo Dome consists of a water run-o hose, located
underneath the optical dome. Please use caution that small amounts of
water accumulation will be present directly underneath the Igloo Dome,
resulting in slippery conditions.
* A 50/50 blend of propylene glycol and water has a freezing point of
-26°F. If lower temperature protection is required, it can readily be
attained by increasing the concentration of propylene glycol Antifreeze -
for example; a 60/40 blend of Antifreeze and water gives antifreeze
protection to -54°F.
Publicidad
