Setting Parameters - Crivit Z30341 Instrucciones De Utilización Y De Seguridad

Getting started
Note: In hold mode the measuring functions of the pedometer
are disabled.
j
Press the MODE button
hear a signal.
steps.
j
Press the MODE button
count mode. You will hear a signal.

Setting parameters

Q
j
Switch the device to hold mode (see "Hold mode / Count
mode").
j
Press the SET button
Note: If you do not make an entry within 14 seconds, the de-
vice automatically switches to hold mode.
j
STRIDE appears on the function bar
the default 60 cm appear on the LCD screen. Press the MODE
and CLEAR
4
Note: The stride length can be set within a range of 10 to
225 cm.
tip: Hold down the MODE
prox. 3 seconds. This enables you to make the settings faster. You
can also use this faster setting option for subsequent settings.
j
Confirm your entry by pressing the SET button
appears on the function bar
88 GB/MT
All manuals and user guides at all-guides.com
for approx. 3 seconds. You will
4
flashes alternately with the number of
for approx. 3 seconds to enter
4
to switch to entry mode.
3
buttons to set the required stride length.
1
4
14
disappears.
. The cm icon
14
and CLEAR
1
. The kg icon
15
and
15
buttons for ap-
. WEIGHT
3
and the