Rear Connections; Time Mode - Numark CDN25 Manual De Inicio Rápido Del Usuario

Search Function: As explained under "SEARCH BUTTON", when
search is pressed and you rotate the wheel, the music will rapidly
scan the music to find a cue point.
Pitch Bend Function: allows the user to temporarily change the
speed of the music to align beats. When the beats of the music
of the CD you wish to match is fast compared to the tempo of the
other music rotate the jog wheel counter clockwise (to the left).
When the CD is behind rotate the jog wheel clockwise (to the
right). The pitch changes temporarily while the jog wheel is
rotated. The faster you rotate the wheel the more pitch is
changed. Releasing the wheel results in a return to the original
pitch.
10. Pitch Range: actives the pitch slider and adjusts the amount of
control the pitch slider has on the overall speed of music.
Tapping the pitch will toggle slider between 8% and 16% pitch
ranges. Holding the pitch for 3 seconds will deactivate the pitch
control.
11. Pitch Range LEDs: indicate current pitch range. When both
LEDs are off the pitch slider is not active
1. Control Cable Connector- Plug in the 8-pin cable included
in here to connect the remote control and main CD unit
together
2. IEC Power Plug Connector - Plug your supplied power
cord in here.
3. Voltage Selector - Set this switch to the voltage for your
location.
4. RCA Audio Connectors - Connect your CD player to your
mixer from this line level output.
5. Digital Output - The format is type 2, form 1, also known
as S/PDIF (Sony/Phillips Digital Interface Format). In order
to use the digital output you should not use variable pitch
1. CUE - Flashing when the unit is setting a cue point. Lit
continuously when the unit is paused at a cue point.
2. PAUSE (II)- Active when the unit is paused.
3. PLAY (>)- Active while the unit is actually playing a CD.
4. TRACK - Shows the track that the unit is playing.
5. TOTAL – indicates when total CD remaining tracks are
displayed.
6. MINUTES - Shows the minutes elapsed or remaining
depending on mode setting.
7. SECONDS - Shows the seconds elapsed or remaining
depending on mode setting.
8. FRAMES - The CD Player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed
or remaining depending on mode setting.
9. SEARCH – indicates when the unit is searching through the
music
12. Pitch Slider: By moving the slider in the (+) direction the speed
of the music permanently speeds up. By moving the slider in the
(-) direction the speed of the music permanently slows down. To
match the speeds of two CDs you can adjust the pitch. When the
tempo of the music of the CD you wish to match is slow compared
to the tempo of the other music, move the slider to the (+) side
and match the speed. When faster, move the pitch slider to the
(-) side. By making this adjustment the speeds will be matched
though the beats may not yet be aligned.
13. CD Drawer – Place your CDs you wish to play in here. This unit
is designed to play commercially available CD and properly
burned and finalized CDR formats. Due to variances on the
specification of certain CD burners and CDs some discs home
made CDs may not play properly.
14. Power Switch- Turn on and turn off the machine with this
button. The unit should always be shut down with this button
first before any external power is removed.

REAR CONNECTIONS

6.
7.
LCD DISPLAY FEATURES
10.
11.
12.
13.
14.
15.
16.
slider and the pitch bend buttons. If you adjust the pitch,
other devices may not read the digital output properly
because the sampling rate changes
Video Output (CDN25+G only) – Plug the composite video
input on your video monitor or mixer directly into this output.
The output will be the text graphics from CD+G Karaoke
disks.
PAL/NTSC Switch (CDN25+G only) – The changes the
scan rate of your composite video output. You should set this
to your local standard. The incorrect setting will cause your
display to flicker. Typically set this to NTSC for the US and
PAL for Europe.
CONTINUOUS PLAY – Shows when the unit is set to
play back the entire CD without stopping between tracks.
SINGLE PLAY- Shows when the unit is set to play just
one track at a time.
CD IN – indicates a standard CD is in the unit.
TIME BAR - Shows either track elapsed time, remaining
track time, or remaining total time depending on the
setting of the "time" button.

TIME MODE -

(Remain) indicates when track remain time is displayed.
(Total) indicates when total CD remain time is displayed
note: if both indications will not be lit when the unit is
showing "elapsed" time
PITCH DISPLAY – indicating current pitch