Design
Environmental temperature
Rel. humidity
Dimensions (W x H x D)
Video compression
Colour resolution
Video input
Video output
Video standard
Video scanning frequency
A/D conversion
Geometric resolution
Optocoupler
Trigger and signal inputs
Number of trigger and signal inputs
Trigger edge
Triggering of interrupts
Voltage range
Input current
Electrical isolation
Digital inputs
Number of digital inputs
Triggering of interrupts
Voltage range
Input current
Electrical isolation
Digital outputs
Number of digital outputs
Output current
Electrical isolation
Siemens Building Technologies
Fire Safety & Security Products
All manuals and user guides at all-guides.com
SISTORE MX 3204
with 4 video inputs
Video recording always takes place in YUV 4:2:2 true colour format.
The VGA board must be set to 16-bit mode (Hi-Color). Video compression is
4/8/16 external composite inputs,
YC signals are not supported.
2 outputs: CVBS,
YC signals are not supported.
16
12 mA (typ.), protected against polarity reversal
4
12 mA (typ.), protected against polarity reversal
8
SISTORE MX systems are configured for DHCP by default.
If there is no DHCP server in the network, select the menu sequence Administration>
Configuration, then click the button TCP/IP parameters in the Network tab and enter a permanent
IP address instead of DHCP. Otherwise there may be quite a long waiting time as the system will wait
for a reply from the non-existent DHCP server.
SISTORE MX 3208 - 3232
with 8, 16 or 32 video inputs
Embedded
5 – 45 °C
20 – 80 % without condensation
430 x 87 x 370 mm
made in JPEG format.
8/16/24/32 external composite inputs,
YC signals are not supported.
YC signals are not supported.
PAL, NTSC
PAL: 13.5 MHz
NTSC: 13.5 MHz
PAL: 1/100 s (20 ms) per field
NTSC: 1/120 s (16.7 ms) per field
PAL: 704 x 576 pixels with 2 fields
NTSC: 704 x 480 pixels with 2 fields
Positive or negative
Yes
5 – 24 V DC
Up to 2500 V
No
5 – 24 V DC
Up to 2500 V
50 mA (max.), reversible fuse
Up to 2500 V
Technical data
4 outputs: CVBS,
32
8
16
9
02.2009