SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3600SS
PRINTING MODES
The 3600SS can be set to print automatically or manually using the SET MODE feature.
When set to AUTO the clock will print whenever the actuator is activated.
When set to MANUAL, the clock will only print when the actuator is activated and the
"manual button" located in the left hand corner above the display screen is pressed.
Manual button
ADJUSTING DOCUMENT EDGE
The actuator can be adjusted to accommodate different document widths.
1
Place clock on its side so the viewing window is facing towards you.
2
Locate the "actuator adjustment knob" on the bottom of the clock.
3
Push "actuator adjustment knob" in while sliding the actuator back and forth to
adjust position.
10
PRINTING MODES & ADJUSTING DOCUMENT EDGE
Actuator
888.479.7264
SMART SITE™ TIME CLOCK & DOCUMENT STAMP
Model 3600SS
PRINTING CUSTOM MESSAGES
Scenario: It is 7:46AM on 7/12/13. You have selected " DATE YR FILE " from the Set
Format Messages "(SET FMT MSGS)" menu. You have set Custom Message 1 "(CST MSG 1)"
to PYRAMID TIME SYS. You have set Custom Message 2 to "<COUNTER>". The clock will
print to your document as follows:
line 1
JUL12'13 FILE
line 2
PYRAMID time sys
line 3
1
After clock prints date stamp (line 1) "JUL 12'13" you have three seconds to print
custom message (line 2), "PYRAMID TIME SYS". If you do not print first custom message
(line 2) within 3 seconds, the clock will revert to date stamp (line 1).
Example A
line 1
JUL 12'13 file
line 2
JUL 12'13 FILE
After you print first custom message (line 2), "PYRAMID TIME SYS", you have three
seconds to print second custom message (line 3), "1". Again, if you do not print second
custom message (line 3) within 3 seconds, the clock will revert to date stamp (line 1).
Example B
line 1
JUL 12'13 file
line 2
PYRAMID time sys
line 3
JUL 12'13 file
After you print second custom message (line 3), "1", the clock will revert to date stamp
(line 1).
Example C
line 1
JUL 12'13 FILE
NOTE: Each time date stamp prints(Examples A, B & C) the counter advances +1 (even
though sequential numbers did not print).
PRINTING CUSTOM MESSAGES & CARBON COPIES
11