Firmware - Devolo Mesh WiFi 2 Manual De Instrucciones

50 Network configuration
Restoring the device configuration
An existing configuration file can be sent to the
devolo Mesh WiFi 2 in the System
on area and enabled there. Select a suitable file via
the Select file ... button and start the operation by
clicking the Restore button.
Factory Settings
The devolo Mesh WiFi 2 is reset to the original fac-
tory defaults in the System
with the Factory Reset option.
Doing so causes you to lose your personal
Wi-Fi and PLC settings. The last-assigned
passwords for the devolo Mesh WiFi 2 are
also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as
devolo Mesh WiFi 2. This function can be useful for
creating a variety of configurations that will let you
quickly and easily set up the device for use in diffe-
rent network environments.
Reboot device
In order to reboot the devolo Mesh WiFi 2, select
the Reboot button in the System
on area.
devolo Mesh WiFi 2

Configurati-

Configuration area
a file and reloaded

Configurati-

4.7.4 Firmware

The firmware of the devolo Mesh WiFi 2 includes
the software for operating the device. If necessary,
devolo offers new versions on the Internet as a file
download, for example to modify existing functi-
ons.
Current firmware
The currently
devolo Mesh WiFi 2 is displayed here.
Searching for and updating firmware
automatically
The adapter can also look for up-to-date firmware
automatically. To do this, enable the Regulary
check for firmware updates option.
The devolo Mesh WiFi 2 lets you know
when a new firmware version becomes
available. The option is enabled by default.
into the
The Automatically install firmware updates op-
tion allows the adapter to automatically install the
firmware it has found.
The devolo Mesh WiFi 2 automatically up-
dates its firmware. The option is enabled by
default.
installed firmware of the