Search Button; Effect Parameter - König Electronic KN-DIGICON20 Manual De Uso

11. PITCH BEND + / - BUTTON
When each of the two CD players is playing, the pitch bend function allows the position of the
bass beat to be matched after the pitch has been adjusted. The pitch will automatically rise up to
+ 16% from the current setting while pressing the " + "button. While pressing the " – " button, the
pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the
position of the beats can be matched.

12. SEARCH BUTTON

Pressed the button to switch the function of Jog Dial between SEARCH and PITCH BEND.
• When the indicator LED is light, dial the jog for quick search forward and backward.
• When the indicator LED is off, dial the jog for pitch bend function.
• If the jog is unmoved for 8 seconds, the indicator is off, and the jog is for pitch bend function.
13. SCRATCH EFFECT
LED ON: Scratch ON
LED Off: Scratch Off
14. SYNC:
This function is to synchronize the BPM of Unit 1 & 2 automatically.

15. EFFECT PARAMETER

Adjust the parameter of the effect by turning adjust knobs. X for Strength control, Y for Length
control
16. EFFECT SELECTOR
To select the effects from PC software
17. EFFECT ON/OFF
Effect On/off Switch
Mixer section
18. Master Volume control
Adjusts the master output sound level.
19. BOOTH Volume control
Used to adjust the level of the BOOTH MONITOR output. Level is not affected by the master
volume and master balance.
20. CUE LEVEL (Cue level adjustment knob):
Adjusts headphone monitor sound. When CH-1 to CH-2 has been selected, the level is not affected
by master volume or master balance adjustment
21. GAIN:
Adjust the input signal level LCD Display shows [ Sam Forward ] or [ Sam Reverse ] for 2 Sec.
5