König Electronic KN-DIGICON20 Manual De Uso página 7

22. CHANNEL EQ COINTROL
HI:
Adjusts high-tone input sounds. At the center position, sound will be fl at.
23. MID:
Adjusts mid-tone input sound. At the center position, sound will be fl at.
24. LOW:
Adjusts low-tone input sound. At the center position, sound is fl at.
25. KILL
Press the buttons to mute the selected band (Hi/Mid/Low) of the track
26. CUE:
Used to select the source (CH-1 & CH-2, MASTER) to be monitored with headphones.
Press it again to cancel the selection. Pressing multiple buttons to derive mixed sound from the
selected sources.
27. AUTO MIX:
Press the Auto Mix Button to mix unit 1 & unit 2 automatically (with fade in/out effect)
28. CHANNEL (CH-1 TO CH-4) FADER
Adjusts the channel output sound levels.
29. CROSS FADER
Used to adjust the sound mix volume of the sources set to Ch1 or Ch2.
6