Last Number Redial; Adjusting Speaker Volume - Konig Computer CMP-HEADSET30 Manual De Uso

5.4. Last number redial

a. While the Headset and Bluetooth mobile are in Standby Mode, press and hold
the button for 2 seconds to redial the last dialed number.
b. (Advance function) If the Headset is connected with your mobile phone and
another Bluetooth transmitter such as the Audio Adaptor, press and hold the
Button for 2 second to redial the last dialed number. Press STOP button
to end the call as normal.

5.5. Adjusting speaker volume

a. While a call is in session, pressing and releasing VOL + / VOL - buttons will adjust
the speaker volume.
b. (Advance function) While the Headset is playing music, pressing/releasing VOL+/
VOL - buttons will adjust the speaker volume.
5.6. Activating voice dialing
When the Headset is in standby mode, press and hold the button
seconds until a long beep is heard. The Headset is connecting with your mobile
phone for voice dialing function. If the connection is successfully made, the phone
will ask for the name of the person you wish to call. The call will be executed in a few
seconds. If the connection is failed, the Headset will beep and go back to standby
mode. Before the Headset entering into voice dialing mode, make sure the voice
dialing function of the phone is enabled.
Remarks: Voice dialing function is not supported in Sony Ericsson K750i
5.7. Transfer call
a. To transfer a call from the Headset to your mobile phone
If the mobile phone is enabled with the Hands-free profile, press the
button while the call is in session and it will be transferred to your mobile phone.
If the mobile phone is enabled with the Headset profile, follow the instructions of
your mobile phone manual to do call transfers.
b. To transfer a call from your mobile phone to the Headset
Follow the instructions of the mobile phone manual to do call transfers
Backward
6
Volume up
Forward
Volume down
for 2