Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Stereo Headset paired with Stereo Audio Adaptor Guide
6.1. Pairing
a.
While the Headset is powered off, press and hold
The LED will flash red and green alternately, which indicates the Headset in
Pairing Mode. The Pairing Mode will last for one minute.
b.
While the Stereo Audio Adaptor is powered off, press and hold button. The LED
will flash red and green alternatively, which indicates the Audio Adaptor is in
Pairing Mode. The Pairing Mode will last for one minute.
c.
Put the Headset and the Audio Adaptor close to each other, 0.5 to 3 meters.
After a few seconds, their LED's will turn into flashing green, which indicates
successful pairing. Both units are in Standby Mode and ready to transmit audio
signal, or music from the audio source.
6.2. Listening to music
a.
After successful pairing, plug the jack of the Audio Adaptor to the 3.5 mm socket
of any audio source such as iPod, MP3, CD player, Notebook PC, or others.
b.
Put the earpiece on. Play the music on the audio source as normal; you will listen
to the stereo music from the earpiece.
c.
The speaker volume of the earpiece can be adjusted by pressing and releasing
the VOL + / VOL- buttons.
d.
Turn the Headset off after use. The Audio Adaptor will be turned off automatically.
Next time, you don't need to pair them again. Turn them on, and then they will be
paired automatically and ready to transmit music from the audio source.
7.
Stereo Headset paired with USB Bluetooth Dongle Guide
7.1. Pairing
a.
While the Headset is powered off, press and hold
The LED will flash red and green alternatively, which indicates the Headset in
Pairing Mode. The Pairing Mode will last for one minute.
b.
Put the Headset, the USB Bluetooth dongle and the PC close to each other, 0.5
to 3 meters.
c.
Insert the USB Bluetooth Dongle into a USB port of your Notebook PC / desktop
PC to start the pairing process. Typically, this has to be done by executing a
Bluetooth application program supporting the Audio Visual (A/V) Profile, to
discover the Headset. It may take some time to search it depending on the
number of Bluetooth devices nearby.
7
button for 5 seconds.
button for 5 seconds.
Publicidad
