Remote Control Unit - Maytronics Dolphin COMM. 12 Instrucciones Para El Usuario

7. REMOTE CONTROL UNIT

The remote control unit enables you to manually control the Robotic Pool Cleaner, to clean those
hard-to-reach spots or places that were skipped during the standard cleaning cycle.
The remote control
unit offers two
operation modes:
automatic mode and
manual direction
control mode.
In automatic mode,
the cleaning cycle
length can be
changed.
In manual direction
mode, the robot's
motion can be
controlled manually.
Manual direction control mode
1. Press the On/Off button once. This puts the remote control in
2. Press the Forward or Backward arrows to maneuver the
3. Press the Forward or Backward arrows again to maneuver the
4. To stop the Robotic Pool Cleaner, press the arrow showing
5. When the robot is idle (standing still) and you press the Turn
6. If you press the Turn Left or Turn Right arrows while the robot
6
manual direction mode. Use the direction control arrows (see
right) to control the movement of the robot around the pool.
Robotic Pool Cleaner forwards or backwards at a faster speed.
Robotic Pool Cleaner forwards or backwards at the standard
cleaning speed.
the opposite direction to the direction in which the robot is
currently moving.
Left or Turn Right arrows, the robot will turn left or right by
moving one belt forwards and the other backwards.
is driving forwards or backwards, the robot will turn left or right
by turning one belt and stopping the other belt.
Radio reception meter
When no black lines are showing, move
closer to the power supply unit
Battery level meter
When flashing, change the batteries
Manual control indicator
When flashing, you are in manual direction
control mode
Cleaning cycle icons
Forward
Turn right
Turn left
Backward
On/Off button
Manual/automatic select button
Set/OK button
COMM. 12 Robotic Pool Cleaner
Direction control arrows
Direction
control
arrows
User Instructions
|