CAME RKLT-WL Manual Del Usuario página 9

⚠
Prepare suitable piping and ducts for routing the
electrical cables, ensuring protection against
mechanical damage.
Electrical connections
⚠
Respect the envisaged connections.
⚠
Improper connection may cause serious damage
to the control unit.
Mains power supply
⑨ ⑦
brown (phase) earth
⑧
blue (common)
Bulb power supply
⑤ ⑥
blue (common) earth
④
brown (phase)
⚠
Use a switch button with central zero and
automatic return.
Putting into operation

All the memorised sequences are timed.

When powered, the control unit emits an acoustic
signal: 3 beeps.
In addition to the radio control, the unit can also be controlled
by an external button that is activated after storing the 1st TX.
When the UP button is pressed, the light comes on. When
the DOWN button is pressed, the light goes off .
The On/Off command can also be managed sequentially by
acting on the "Stop" button alone.
MEMORISING THE TX

Act within a minute of having powered the control
unit.
⚠
Any other motors or virgin accessories in the range
of action of the TX must not be powered.
DELETING ALL THE MEMORISED TXS
In order to delete all the memorised TXs, refer to Fig.
or hold down the unit programming button for 10 seconds
until you hear 3 beeps.

This procedure clears all the TXs in the memory.
⚠
After deletion, wait 10" before performing other
operations.
TX management
Memorising an additional TX (2nd)
In order to memorise a second TX, refer to Fig.
the unit programming button briefl y, wait for the beep and
press UP on the TX to be memorised.
A maximum of 20 TXs (including weather stations and/or
timers) can be memorised.

If you attempt to add 21 TXs, the unit beeps 5 times
in a row, indicating that the memory is full.
Dismantling and disposal
Before proceeding with these operations, it is always
advisable to check specifi c regulations in force in the
place of installation. Packaging components (cardboard,
plastic etc) can be disposed of together with normal
household waste without any diffi culty, by simply sepa-
rating the diff erent types of waste and recycling them.
Other components (circuit boards, transmitter batteries
etc.), may contain pollutants. They should therefore be
removed and handed over to companies authorised to
recover and dispose of them.
DISPOSE OF PROPERLY!
The data and information provided in this manual are subject to
change at any time without prior notice.
or press
EC Declaration of Incorporation
Came Cancelli Automatici S.p.A. declares that this de-
vice complies with the essential requirements and other
relevant provisions established in Directives 2006/95/
EC, 2014/30/UE, 1999/5/EC.
To request a true copy, contact Came Cancelli Automatici S.p.A.
For more information or troubleshooting, call the Italian freephone
number 800 295830.
119T70551 - ver. 3 - 119T70551 3 - 09/2013