Appendixes; Appendix A: Glossary - Belkin F5D7632 Manual De Usuario

Appendixes

Appendix A: Glossary

IP Address
The "IP address" is the internal IP address of the Router. To access the
advanced setup interface, type this IP address into the address bar of your
browser. This address can be changed if needed. To change the IP address,
type in the new IP address and click "Apply Changes". The IP address you
choose should be a non-routable IP. Examples of a non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
Subnet Mask
Some networks are far too large to allow all traffic to flood all its parts.
These networks must be broken down into smaller, more manageable
sections, called subnets. The subnet mask is the network address
plus the information reserved for identifying the "subnetwork".
DNS
DNS is an acronym for Domain Name Server. A Domain Name Server is
a server located on the Internet that translates URLs (Universal Resource
Links) like www.belkin.com to IP addresses. Many ISPs do not require
you to enter this information into the Router. If you are using a static IP
connection type, then you may need to enter a specific DNS address and
secondary DNS address for your connection to work properly. If your
connection type is Dynamic or PPPoE, it is likely that you do not have to
enter a DNS address.
PPPoE (routing mode, for multiple PCs)
Most ADSL providers use PPPoE as the connection type. If you use
an ADSL modem to connect to the Internet, your ISP may use PPPoE
to log you into the service. Your connection type is PPPoE if:
1.
Your ISP gave you a user name and password which is required
to connect to the Internet.
93 93
1
2
3
4
5
6
7
8
9
10