Product Inspection; Assembly & Occupant Securing Instructions; Intended Use - DQE SLYDE IC5010 Manual De Instrucciones

PRODUCT INSPECTION

The condition of the Slyde is the responsibility of the owner. It is important that the Slyde is working properly before the product is put into service. Have a qualified
person use the following list and the operating instructions to check the Slyde before the product is put into service.
Unpack the cartons and check all items for proper operation.
Inspect Slyde and accessories thoroughly upon receipt for any damage that may have occurred during shipping and to ensure proper operation.
Inspect Slyde and accessories before each use for wear, fraying, or other damage.
ASSEMBLY & OCCUPANT SECURING INSTRUCTIONS
These instructions are printed on the inside of each Evacuation Slyde.
1. Place Evacuation Slyde flat
on the floor or ground. Unclip
black straps and unfold Slyde
as shown.
FOR TRAINED
PROFESSIONAL
USE ONLY
WEIGHT CAPACITY
EVACUATION SLYDE - STANDARD (IC5010)
400 lb
MAX
(182 KG)
EVACUATION SLYDE - BARIATRIC (IC5020)
600 lb
MAX
(272 KG)
DQE Inc.
OPERATION MANUAL
Locking Slots
3. Capture the foot panel by
2. Fold sidewalls up to be
folding over the extended
vertical and fold the foot
sidewall panels near the feet.
panel up over itself.
Secure the foot assembly
by clipping the strap and
adjusting it to be snug.
INTENDED USE: Slyde is an emergency sled for
safely evacuating non-ambulatory residents
or patients [occupant] from any multi-floor
building.
STORAGE: Store Slyde in a dry, sunlight free
environment 50º - 95ºF.
www.EvacuationSlyde.com
4. Form the head panel 5. Capture the folded
by folding the side wall and indexed "A" and "B"
extensions toward each side wall extensions by
other. The "A" and "B" tabs folding the bottom "C"
should align and index
flap up and covering
into the "A" and "B" slots.
them. Lock the "C" tab
by pushing it through
the "C" locking slot.
Secure the occupant
and evacuate.
CAUTION: Improper usage of the Evacuation
Slyde or any accessory can cause injury to
the occupant or the operator. Operate the
Evacuation Slyde and accessories as described
in the operation manual.
Covered by one or more of the following patents: US 7,422,220 B2;
US 7,699,324 B2; EP 2,057,057 B8; CA2654308
Not a handle
4