Bissell PROHEAT 2X REVOLUTION 1548 Serie Guia Del Usuario página 9

Filling Your Clean Water Tank
formula
1
The Clean Water
Tank is at the top
of the machine.
4
BISSELL
With Trial Size
Antibacterial Formula:
Pour into the Clean
Water Tank up to the
EasyFill line. Twist
the cap back onto
the tank.
A few notes about filling the Clean Water Tank:
» Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.
» When using BISSELL Deep Clean + Antibacterial formula: Only fill your
Clean Water Tank with the recommended amount of water and formula to achieve
antibacterial benefits.
NOTICE
BISSELL Deep Clean + Antibacterial formula is only for BISSELL machines with EasyFill System.
ATTENTION
Do not overwet carpet. Be careful not to run over loose objects or edges of area rugs. Stalling the brush
may result in premature belt failure.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
5
At the bottom of
the Upper Handle,
align the Clean
Water Tank with the
grooves and slide
the tank into place.
2
Lift the Clean
Water Tank
straight up to
remove from the
machine.
For Future Use
with Full Size
Antibacterial
Formula:
After filling the Clean
Water Tank with hot tap
water, twist the yellow
cap back onto the tank.
Firmly insert the full size
formula bottle into the
cap on the Clean Water
Tank and squeeze until
formula reaches the
EasyFill line.
3
Unscrew the cap
from the Clean
Water Tank. Add
hot tap water to the
water fill line.
www.BISSELL.com
9