Human Touch FORTI Manual De Uso Y Cuidado página 4

get ready
Unpack the box
Chair Base
Shoulder panels (2)
Remote holder
ATTACH THE REMOTE HOLDER
1. Gently raise the backrest to an upright position.
2. Attach the remote holder to the chair frame using the hook-and-loop fasteners.
Chair frame
humantouch.com
Armrests (2)
Head Pillow
Allen wrench & 6 screws
Remote holder
4
Your Human Touch massage chair requires some assembly.
don't worry, it's easy! Just attach the remote holder, armrests, seat
cushion, shoulder panels, and head pillow, and you're set to go!
INSTALL THE ARMRESTS
1. Place one of the armrests into position, aligning
the tube toward the front of the armrest with the
corresponding hole in the chair base.
IMPORTANT - If you are
installing the left-hand armrest,
make sure the air hose located
on the left-hand side of the
seat is out of the way before
installing the armrest to avoid
damaging the hose.
Air hose
2. Push the armrest firmly downward.
NOTE: If the armrest won't push all the way downward, wiggle it slightly side to side
post toward the middle of the armrest that must align with a hole in the chair for the armrest to
install properly.
3. Using the provided Allen wrench, install three of the
provided Allen screws into the inside of the armrest to
secure it.
4. Repeat steps 1 through 3 to install the other armrest.
But
Armrest
Tube
— there is a
Armrest
5