Installation Of Wired Controller; Wire Connection - Gree GMV-N140U/A-T Manual De Instalación Y Operación

OPERATING INSTALLATION MANUAL FOR AHU-KIT UNIT

4.7 Installation of Wired Controller

Please refer to User Manual of Wired Controller for the installation details.
Notes:
When installation is finished, the unit must be tested and debugged before operation. Please
refer to Instruction Manual of ODU for auto addressing and debugging details.

5 Wire Connection

Notes:
① Units must be earthed securely, or it may cause electric shock.
② Please carefully read the wiring diagram before carry out the wiring work, incorrect wiring
could cause malfunction or even damage the unit.
③ The capacity of power supply should be big enough.
④ The unit should be powered by independent circuit and specific socket.
⑤ The wiring should be in accordance with related regulations in order to ensure the units
reliable running.
⑥ Install circuit breaker for branch circuit according to related regulations and electrical
standards.
⑦ All wiring must use pressure terminal or single wire. Multi-twisted wire that connects
directly to the wiring board may cause fire hazard.
⑧ Keep cable away from refrigerant piping, compressor and fan motor.
⑨ Do not alter the inner wires of air conditioner. Manufacturer does not assume
responsibility for damage or abnormal operation due to this reason.
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
19