Troubleshooting - Black+Decker BDCS50 Manual De Instrucciones

The first, which will result in exchanges
only, is to return the product to the retailer
from whom it was purchased (provided
that the store is a participating retailer).
Returns should be made within the
time period of the retailer's policy for
exchanges. Proof of purchase may be
required. Please check with the retailer
for its specific return policy regarding
time limits for returns or exchanges. The
second option is to take or send the product
(prepaid) to a BLACK+DECKER owned
or authorized Service Center for repair
or replacement at BLACK+DECKER 's
option. Proof of purchase may be required.
BLACK+DECKER owned and authorized
service centers are listed online at
www.blackanddecker.com.
This warranty does not apply to accessories.
Problem
• Tool will not charge.
For assistance with your product, visit our website www.blackanddecker.com for
the location of the service center nearest you or call the BLACK+DECKER help line
at 1-800-544-6986.
This warranty gives you specific legal rights and
you may have other rights which vary from state
to state. Should you have any questions, contact
the manager of your nearest BLACK+DECKER
Service Center. This product is not intended
for commercial use, and accordingly, such
commercial use of this product will void this
warranty. All other guarentees, express or
implied, are hereby disclaimed.
LATIN AMERICA: This warranty does not
apply to products sold in Latin America. For
products sold in Latin America, check country
specific warranty information contained in the
packaging, call the local company or see the
website for warranty information.
FREE WARNING LABEL
REPLACEMENT: If your warning labels
become illegible or are missing, call
1-800-544-6986 for a free replacement.

Troubleshooting

Possible Cause
• Charger not plugged into
a working outlet.
• Surrounding air temperature
too hot or too cold.
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.
9
Possible Solution
• Plug charger into a
working outlet. Refer to
"Important Charging
Notes" for more details.
• Check current at
receptacle by plugging in
a lamp or other appliance.
• Check to see if
receptacle is connected to
a light switch which turns
power off when you turn
out the lights.
• Move charger and tool
to a surrounding air
temperature of above 40
degree F (4,5°C) or below
105 degree F (40,5°C).