Add Tarp And Secure With Ball Bungees - Radio System Corporation PetSafe E-Z Roof Instrucciones De Ensamblado

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step

Add Tarp and Secure with Ball Bungees

3
1. Gather tarp and 14 ball bungees.
2. Drape long side of tarp over frame.
3. Work on one side of the kennel. Pass the cord through the grommet from the bottom up (A). Pass
the cord back through the opening immediately below the ball (B). Pull the end of the cord until the
ball is resting tightly against the grommet (C). The ball bungee is now "permanently" attached to
the tarp.
4. Wrap cord around the kennel frame and then stretch over the ball to secure (D). Repeat steps 3 and
4 to attach all bungees to the tarp and kennel frame.
5. Once one side of the tarp is secured to the kennel, repeat steps 3 and 4 on the other side.
Important: Tarp is not designed to withstand the weight of snow. Remove cover in winter.
Anchors are strongly recommended. PetSafe
A
B
www.petsafe.net
®
Anchor Kit sold separately.
D
C
5

Publicidad

Tabla de contenido
loading

Tabla de contenido