Supply Conditions And Disposal Of Packings And Machine; Setting The Machine; Electric Connections - CELME GPE 250 CE Manual De Producto

NOISE N. 62 DB FOR ALL MODELS
WARNING
: THE ELECTRICAL FEATURES OF EACH EQUIPMENT ARE PRINTED ON THE MOTOR
DATA PLATE. A CHECK OF THE ELECTRIC CONNECTION IS NECESSARY BEFORE INSTALLING
THE EQUIPMENT.

2.2 SUPPLY CONDITIONS AND DISPOSAL OF PACKINGS AND MACHINE

ALL THE SLICERS ARE PACKED IN A STURDY CARDBOARD BOX WITH INTERNAL SHAPED
EDGES WHICH GUARANTEE THE PERFECT INTEGRITY OF THE MACHINE DURING TRANSPORT.
EACH EQUIPMENT INCLUDE:
 DECLARATION OF CONFORMITY E.E.C.
 INSTRUCTIONS FOR USE AND MAINTENANCE
ALL THE PACKING COMPONENTS (CARTON, FOAM, STRAPS, AND SO ON)
CAN EASILY BE DISPOSED OF AS HOUSEHOLD RUBBISH.
WHENEVER THE MACHINE IS INSTALLED IN COUNTRIES HAVING SPECIAL
REGULATIONS ON PACKING DISPOSAL, THE FINAL USER MUST COMPLY
WITH THE REGULATIONS IN FORCE.
THE USE OF THE WEEE SYMBOL INDICATES THAT THIS PRODUCT MAY
NOT BE TREATED AS HOUSEHOLD WASTE. BY ENSURING THIS PRODUCT
IS DISPOSED OF
ENVIRONMENT. FOR MORE DETAILED INFORMATION ABOUT THE
RECYCLING OF THIS PRODUCT, PLEASE CONTACT YOUR LOCAL
AUTHORITY, YOUR HOUSEHOLD WASTE DISPOSAL SERVICE PROVIDER
OR THE SHOP WHERE YOU PURCHASED THE PRODUCT.

SETTING THE MACHINE

THE MACHINE CONNECTION AND THE SETTING AT WORK MUST BE MADE
PERSONNEL.
WARNING:
BOTH THE SYSTEM AND LOCATION WHERE THE EQUIPMENT HAS TO BE SET
MUST COMPLY WITH THE REGULATIONS FOR THE ACCIDENT PREVENTION AND ELECTRICAL
REGULATIONS "CEI" IN FORCE.
THE MANUFACTURER DECLINES ANY AND ALL RESPONSIBILITY FOR DIRECT OR INDIRECT
DAMAGES WHICH MAY ENSUE FOR NON-COMPLIANCE WITH THE ABOVE MENTIONED
REGULATIONS.
SET THE EQUIPMENT ON A WIDE, LEVELLED, DRY AND FIXED FACE,
SOURCES AND WATER SPRAYS, AND WITH 80 CM. GROUND CLEARANCE. (Fig.1)

ELECTRIC CONNECTIONS

THE EQUIPMENT IS SUPPLIED WITH AN ELECTRIC CABLE TO BE CONNECTED TO A MAGNETO-
THERMIC MAIN SWITCH WHICH STOPS THE MACHINE WHEN THE OPERATOR COMES IN
FORTUITOUS CONTACT WITH THE ROTATING ELEMENTS.
IT IS IMPERATIVE THAT THE EQUIPMENT IS WELL GROUNDED ACCORDING TO THE
REGULATIONS IN FORCE
THE MANUFACTURER DECLINES ANY AND ALL RESPONSIBILITY FOR DIRECT AND INDIRECT
DAMAGES WHICH MAY ENSUE FOR NON-COMPLIANCE WITH THE REGULATIONS IN FORCE.
ALL THE SLICERS OF THE SERIES "GPE" ARE MANUFACTURED SINGLE-PHASE V.230/1/50 HZ.
WHENEVER THE VOLTAGE DIFFERS FRON THE ABOVE MENTIONED ONES, PLEASE APPLY TO
THE MANUFACTURER, OR THE AUTHORIZED DISTRIBUTOR.
CORRECTLY, YOU WILL HELP PROTECT THE
3) INSTALLATION
BY SKILLED
FAR FROM HEAT
10