On-Screen Manager (Osm ) - NEC MultiSync P1150 Manual Del Usuario

E - 12
2. Follow the installation guidelines on the page before
(Connections to computers or cards using BNC cables), to
connect the second system.
3. Turn on the monitor and both systems.
4. This completes the installation.
5. Use the BNC/D-SUB switch on the front panel of the monitor
to switch between the systems.
NOTE: If you have any problems, please refer to the section "Trouble
Shooting".

On-Screen Manager (OSM )

Now, On-Screen Manager (OSM ) Controls have made the MultiSync
monitor's Advanced Digital Control System easier to use by providing
menus on screen. A touch of the up front controls turns on OSM,
allowing you to easily navigate through menus and adjust controls.
OSM allows you to control Brightness, Contrast, Size, Position,
Geometry and other OSM Utilities. User adjustments are saved
automatically when you change menus. Controls can be reset to factory
settings by pressing the reset button.
The enhanced Color Control System allow you to adjust the colours on
your screen and customise the color accuracy of your monitor. Through
the OSM's enhanced Color Control System, you can better match your
image color to a variety of standards, such as:
–
Your personal preference (depending upon the application used).
–
Another monitor.
–
Your printer or Service Bureau output.
You can also access five industry standard color temperature settings
and customise and store up to five personal settings.
On-Screen Manager (OSM )