Final Assembly - Emerson LINDELL Manual Del Usuario

6.1
Screw the two Threaded Studs (supplied) into the tapped
holes in the Hanger Bracket (Figure 20).
6.2
Lift the Ceiling Cover up to the Threaded Studs and turn
until studs protrude through the holes in the Ceiling Cover
(Figure 21).
Secure the Ceiling Cover in place by sliding Lockwashers
(supplied) over the Threaded Studs and installing the two
Knurled Knobs (supplied). (Figure 21).
Tighten the Knurled Knobs securely until the Ceiling Cover
fits snugly against the ceiling and the hole in the Ceiling
Cover is clear of the downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.

6. Final Assembly

HANGER
BRACKET
HOLES (2)
THREADED
STUDS (2)
Figure 20
Figure 21
15
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED
KNOBS (2)
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF825
CEILING
COVER