Default Settings; Speed Traps - Quintezz GPS Early Warning System Manual De Usuario

How to add a location?
If you want to add a location manually, press the SAVE button at that location, while you are driving. The DRIVE CONTROL will
confirm the saving of this location as indicated in the following display: (in this case the 3rd user location was saved).
How to delete a location?
If you want to delete a manually added location, press the SAVE button at the respective location. This needs to be done during the
visual and audible alarm for this particular location. The location will be deleted and the DRIVE CONTROL will confirm the deleting
of this location as indicated in the following display:
When you are driving, and when you are at a distance of 500 meter of a user's location that has been saved in the memory of your
DRIVE CONTROL, a warning will be shown and you will hear 'DING DONG' and 'WATCH OUT'. When you are at a distance of 300
meter, the DRIVE CONTROL will repeat 'DING DONG DING DONG'. The alert shown hereafter indicates a user point warning at a
distance of 450 meter. of 450 meter.
5.4 SPEED ALERT
There are two kinds of speed alert warnings showing the above display: 'warning limit speed alert' and 'system limit speed alert'.
In case of a 'warning limit speed alert', you will hear a 'DING' tone. In case of a 'camera limit speed alert', you will hear 'TING TING
TING' with a loud, sharp tone.

DEFAULT SETTINGS

1. Warning limit: 130 km/h
2. Clockbell: ON
3. Language: English
4. Speed indication: Km/h

SPEED TRAPS

Police checks can be effected in many different ways. Frequently used speed-trap methods are radar speed cameras, laser guns,
mobile radar speed cameras and track controls.
-GB-10-