Installation With 2 Points Of Entry - Alcad GRF-411 Manual De Instrucciones

P O R T E R O D I G I TA L - D I G I TA L D O O R E N T RY S Y S T E M S - P O R T I E R N U M É R I Q U E
INSTALACIÓN CON 2 ACCESOS - INSTALLATION WITH 2 POINTS OF ENTRY - INSTALLATION AVEC 2 ACCÉS
ESQUEMA UNIFILAR - SINGLE-WIRED DIAGRAM - SCHÉMA À UN FIL
SECTION TABLE
Up to 100 m -
Up to 25 m -
++
230V~
++
230V~
Funcionamiento - Operation - Fonctionnement
Configure one of the entrance panels as the main panel (See page 22) Configure the remaining panels as secondary panels
(See page 23).
The function activating the electric lock from the entrance panels remains enabled at all times.
SYSTEM ON STANDBY
The telephones are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a telephone is
lifted, an uninterrupted tone will be heard.
SYSTEM ACTIVE. MAKING A CALL
Only the telephone whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance
panel. The call tone will be different for calls from the main entrance panel and calls from other the other panel.
If the handset of another telephone is lifted, intermittent tones will be heard. If the handset of the requested telephone is off the hook or if the
code does not correspond to any telephone, the panel will emit intermittent tones. When several telephones are installed in the flat, all of them
receive the call. The first telephone to be answered will establish communication with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered. The other panels will be deactivated
(blocked). The display of these panels will show how much longer the panels will remain blocked.