Installation In Detached Houses With 2 Points Of Entry (2 X 1 Dwelling Kit) - Alcad GRF-204 Manual Del Usuario

V I D E O P O R T E R O E L E C T R Ó N I C O - V I D E O D O O R E N T R Y S Y S T E M S - V I D É O P O R T I E R É L E C T R O N I Q U E
INSTALACIÓN EN VIVIENDA UNIFAMILIAR CON 2 ACCESOS (2 x KIT 1 VIVIENDA)

INSTALLATION IN DETACHED HOUSES WITH 2 POINTS OF ENTRY (2 x 1 DWELLING KIT)

INSTALLATION INDIVIDUEL AVEC 2 ACCÉS (2 x KIT 1 LOGEMENT)
ESQUEMA UNIFILAR - SINGLE-WIRED DIAGRAM - SCHÉMA À UN FIL
SECTION TABLE
Up to 25 m -
Up to 100 m -
Use separate cable hose.
Section according to the number of
monitors/telephones in the dwelling.
Funcionamiento - Operation - Fonctionnement
Nota:
MAKING A CALL. SYSTEM ACTIVATED.
Both monitors receive the call simultaneously, emitting an alert signal and turning on the screen. You are allowed a certain period of
time to answer. Once this period has expired, the system reverts to being on standby. When the receiver of one of the monitors is
picked up, communication will be established with the entrance panel, thereby starting the time allowed for communication. During
this period of time, you can open the door from the monitor. You can also extend the conversation time (see page 4).
When the time allowed for conversation expires, or when the user hangs up the receiver, the system reverts to being on standby. If the
receiver of the other dwelling is picked up, communication cannot take place with the entrance panel and, automatic switch-on will
not be possible.
Note: you will find the time-settings of the system on page 3.
Remarque:
W
Main entrance panel
KIT 1 VIVIENDA
1 DWELLING KIT
KIT 1 LOGEMENT
KIT 1 VIVIENDA
1 DWELLING KIT
KIT 1 LOGEMENT
Secondary entrance panel