Publicidad
Enlaces rápidos
Model/Modelo/Modèle
B2510LF / B2510LF-PPU
B2512LF / B2512LF-PPU
B2511LF-PPU / B2515LF-PPU
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin:
For easy installation of your Delta faucet
you will need:
・To READ ALL the instructions completely before
beginning.
・To READ ALL warnings, care and maintenance
information.
・To purchase the correct water supply hook-up.
Para instalación fácil de su llave Delta
usted necesitará:
・LEER TODAS las instrucciones completamente
antes de empezar.
・LEER TODAS los avisos, cuidados, e información
de mantenimiento.
・Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Delta
facilement, vous devez:
・LIRE TOUTES les instructions avant de débuter.
・LIRE TOUE LES les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien.
・Acheter le bon nécessaire de raccordement.
www.deltafaucet.com
86600
B2510LF
B2511LF-PPU
B2510LF-PPU
86600
1
TWO HANDLE WASHERLESS
LAVATORY FAUCET
LLAVE DE LAVAMANOS
DE DOS MANIJAS SIN ARANDELAS
ROBINET SANS RONDELLE À
DEUX MANETTES POUR LAVABO
B2512LF
B2512LF-PPU
3/32" (2.38mm)
B2515LF-PPU
?
6/24/2015 Rev. B
Publicidad
Manuales relacionados para Delta B2510LF
Resumen de contenidos para Delta B2510LF
- Página 1 B2510LF-PPU B2512LF-PPU You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning. ・To READ ALL warnings, care and maintenance information.
- Página 2 Secure faucet to sink using locknuts provided (1). SHUT OFF WATER SUPPLIES. Continue to either step 3 metal pop-up installation or step 4 plastic pop-up installation. If your model does not have a pop-up skip to step 5. Remove old faucet. Place gasket (1) on bottom of new faucet. Place faucet through mounting holes in sink.
- Página 3 Metal Pop-Up installation Remove stopper (1) and flange (2). Screw nut (3) all the way down. B. Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange (1) into body (2). Pivot hole (3) must face faucet. Pull Push washer (4) and gasket (5) down.
- Página 4 Install Pop-Up Assembly Apply silicone to underside of flange (1). Insert body (2) into sink. Remove stopper (1) and flange (2). Screw nut (3) all the way down. Push Screw flange onto body. Pivot hole (3) must face back of sink. black gasket (4) down.
- Página 5 CONNECT TO WATER SUPPLIES. FLUSH SYSTEM/CHECK FOR LEAKS. Remove aerator (1) and turn faucet handles (2) all the way on. Turn on (HOOK-UPS NOT PROVIDED). Determine which type of connection you will be making. hot and cold water supplies (3) and flush water lines for one minute. (1) Ball nose risers (3/8"...
- Página 6 Maintenance If faucet exhibits very low flow: A. Remove and clean Aerator (3) (page 3), or SHUT OFFWATER SUPPLIES B. Clean Seats and Springs (2) of any debris. *Install stems (1) correctly for proper handle rotation: If faucet leaks from spout: Replace Stem Unit Assembly (1) and Seats and Springs (2).
- Página 7 RP74151▲ RP70851▲ Hot & Cold Lever Hot & Cold Lever Handles w/Screws Handles w/Screws Manijas en palanca con tornillos de agua fría y caliente Manijas en palanca con Manettes-leviers d’eau chaude et d’eau froide avec vis tornillos de agua fría y caliente Manettes-leviers d’eau chaude et d’eau froide avec vis RP41680▲...
-
Página 8: Cleaning And Care
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.