ASSEMBLY
REMOVABLE CANOPY
9)
• To attach the removable canopy: Slide the
canopy clips on the inside of the corresponding
slots on the stroller frame (Fig. 9a).
• Pull over the back of the canopy fabric to
connect the three attachments located on the
top of the seat frame (Fig. 9b).
• To open the canopy: Push forward on the front
edge of the canopy while holding the rear of
canopy in place (Fig. 9c).
• To fold the canopy: Pull backwards on the
front edge (Fig. 9d).
• To remove the canopy: Press inward on both
canopy tabs and slide the canopy up to remove
(Fig. 9e).
9
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
BRAKES
Fig. 9a
10)
• To engage brakes, apply downward
• To release, apply downward pressure to the
Fig. 9b
Fig. 9c
Fig. 9d
Fig. 9e
WARNING:
Always set
brakes when the stroller is not
being pushed so that the stroller
will not roll away. NEVER leave
stroller unattended on a hill or
incline as the stroller may slide
down the hill.
pressure to the rear of the brakes (Fig. 10a).
NOTE: Check that the stroller will not move
once the brakes are properly applied.
front of the brakes (Fig. 10b).
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Fig. 10a
Fig. 10b
10