3-Position Model - VALPES LT 25 Manual De Instalación Y Funcionamiento

EN
3 positions: description
Actuator with a third position
GF3 option allow actuator to be drive and stop in 3 positions. These 3 positions could be between 0° to 180°.In standard actu-
ators are setting in our workshop at 0° 90° 180° that's fit with standard 3 ways ball valve. Others positions still available but
customer have to price on the order witch position is request.
These 3 positions are controlled by 4 switches (FCO,FCF,FCIO and FCIF) and 3 switches for feed back signal
Switches FC1,FC2 are NO contact ( close the circuit in extreme position) and FC3 is a NC contact (open the circuit in interme-
diate position).
3 positions: contacts state
To ensure the correct functioning, the power supply (1, 2, 3, 4) and heating system terminals must be
permanently powered.
In case of low temperature (< -20 °C), the actuator must be powered 3 hours before using (terminals 1-2-
3-4 and 10-11). This time is necessary for the enclosure to reach functioning temperature.
DSBA3700 • Rév. 01/10/2020
6 & 9
0° Closed
inter Open
180° Open
Terminals
4 & 8 F4 & F9
Open Closed
Open Open
Closed Closed
30