Automatic Connection - Parrot MINIKIT+ Guía De Instalación Rápida

Pairing a phone by Bluetooth
Before using the Parrot MINIKIT+ with your phone, you first have to pair both devices.
The pairing process is only required once.
1. From your Bluetooth
peripherals.
2. Select "Parrot MINIKIT+"
3. Enter the "0000" PIN code and validate.
> The Parrot MINIKIT+ says «Pairing successful»
when both devices are paired.
> Depending on the model of your phone, the con-
nection will then be automatic as soon as your phone
is close enough to the Parrot MINIKIT+.

Automatic connection

• Once your phone is paired to the Parrot MINIKIT+, the connection between both devices will be automati-
cally established each time the Parrot MINIKIT+ is turned on. If you leave the Parrot MINIKIT+ in deep sleep
mode in your vehicle, the Parrot MINIKIT+ will automatically exit deep sleep mode when you get back into
your vehicle thanks to its vibration detector.
• If you want to connect a 2
phones are connected to the Parrot MINIKIT+ at the same time, you can always answer an incoming call on
either phone. However you can easily switch between the connected phones by holding down the jogwheel
for two seconds.
Note:
Parrot MINIKIT+.
8
phone, search for Bluetooth
®
phone to the Parrot MINIKIT+, activate the
nd
Only the phonebook of the first paired phone will be available on the
PIN code : 0000
Dual mode
option. When two