Wolf ICBCT15G/S Instrucciones De Instalación página 9

I N S TA L L AT I O N I N S T R U C T I O N S
I N S TA L L AT I O N S P E C I F I C A T I O N S
The illustrations below provide the overall
dimensions, countertop cut-out and installation
specifications for Model ICBCT30G.
IMPORT NT NOTE: 838 mm wide cabinets are
recommended for installation of Model
ICBCT30G.
Wolf 762 mm single built-in oven may be
installed below Model ICBCT30G. For this
installation, unless you are using cabinets
deeper than 610 mm, it is recommended that
the electrical and gas supply be placed in the
base cabinet to the right of the oven. Refer to
installation instructions provided with the built-
in oven for additional specifications.
I N S TA L L A T I O N S P E C I F I C A T I O N S – M O D E L I C B C T 3 0 G
533 mm
FONDO
TOTAL
762 mm
ANCHURA TOTAL
102 mm
Overall Dimensions
M O D E L I C B C T 3 0 G
D I M E N S I O N S
Overall Width
Overall Height
Overall Depth
Recommended
Cabinet Width
Minimum Cabinet Depth
Minimum Height Clearance 102 mm
Cut-Out Width
Cut-Out Depth
Unit dimensions may vary to ± 3 mm.
If the Model ICBCT30G is installed above
cabinets, the gas and electrical placement is not
critical.
within 1.2 m of the right rear of the cooktop.
IMPORT NT NOTE: When multiple cooktop
units are installed side by side, refer to the
countertop cut-out dimensions on page 11.
SIDE
CABINET
330 mm
max
64
mm*
762 mm
102 mm
533 mm
*Minimum clearance from cooktop cut-out to combustible materials up to 457 mm above countertop.
NOTE: Gas and electrical location applies only to installation with built-in oven.
838 mm
578 mm
737 mm
489 mm
grounded outlet needs to be placed
762 mm
COUNTERTOP
TO COMBUSTIBLE
MATERIALS
229 mm
TO
*
COMBUSTIBLE
914 mm
FLOOR TO
COUNTERTOP
min
457 mm
min
229 mm
SEE COUNTERTOP TO
CUT-OUT BELOW COMBUSTIBLE
102 mm
89 mm G E
254 mm
762 mm OVEN OPENING
737 mm
CUT-OUT WIDTH
489 mm
CUT-OUT
DEPTH
64 mm
FRONT min
COUNTERTOP CUT-OUT
*
9