Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical connection
In order to ensure the safe and trouble-free operation of
the device, the following instructions
must be observed for the electrical connection:
• Before connecting the device, compare the connection
data (voltage and frequency) on the rating plate with
those of your electrical network. This data must agree
in order that no damages occur in the device. If in
doubt, ask your qualified electrician.
• The electrical outlet must be protected by a 16A safety
cut-out switch, separate ly from other electricity
consumers.
• The connection between the device and the electrical
network
extension cable with a cross-section of 1.5 mm2. The
use of multiple plugs or gangs is prohibited because of
the danger of fire that is involved with this.
• Make sure that the power cable is undamaged and has
not been installed under the oven or over hot or sharp
surfaces.
• The electrical safety of the device is only guaranteed
if the device is connected to a properly installed
protective conductor system. Operations using an
electrical outlet without a protective conductor are
prohibited. If in doubt, have the house installation
checked over by a qualified electr ician.
The device must not be used if it has been dropped, it
•
obvious signs of damage are visible or if it has leaks.
• The manufacturer cannot be made responsible for
damages that are caused by a missing
or damaged protective conductor.
may
employ
a
3-meter-long
(max.)
Publicidad
