English Quick Reference; Making The Connections; Usb And Internal Memory - Panasonic SC-MAX200 Instrucciones De Funcionamiento

English quick reference

Making the connections

1
Connect the speakers.
Connect the speaker cables to the terminals of the
same color.
2
Connect the FM indoor antenna.
Put the antenna where reception is best.
3
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
4
Set the voltage.
Use a flat-head screwdriver to set the voltage
selector to the AC voltage in your area.
5
Connect the AC power supply cord.
If the power plug does not fit your socket, use the
power plug adapter (supplied).
Disc
Playing disc
1
Press [x OPEN/CLOSE] on the main unit to open
the disc tray.
Put in a disc with the label facing up.
Press [x OPEN/CLOSE] again to close the disc
tray.
2
Press [CD] and then press [4/9] to start
playback.
Stop playback Press [8].
Pause Press [4/9].
playback Press again to continue playback.
Skip album Press [R, T].
Skip track Press [2] or [6]
(main unit: [2/3] or [5/6]).
Search through Press and hold [3] or [5]
track (main unit: [2/3] or [5/6]).

USB and internal memory

USB at a glance
• Play MP3 tracks.
USB A
• Record MP3 tracks to
USB B
• Record sound or music tracks.
USB B
• Play MP3 tracks.
Note:
USB status indicator blinks in red during USB
recording.
Note:
USB status indicator lights up in green when selected.
Recording to a USB device or the
internal memory
Panasonic cannot be held responsible on the action of
consumer to record copyrighted contents which can
cause copyright infringement.
Basic recording
1
Select the source you want to record.
Prepare the disc playback mode.
Record all tracks Select "OFF PLAYMODE".
Record Program the tracks you want.
programmed tracks
Record a single Select "1-TRACK".
track
Make sure the disc is stopped.
Radio
Tune in to the radio station.
External equipment
Connect and play the equipment.
2
Press [MEMORY REC 7/9] or [USB REC 7/9] to
start recording.
The name of the folder that keeps the recording is
shown.
Stop recording
Pause recording Press [MEMORY REC 7/9] or
.
Note:
• Wait for a few seconds for the system to prepare the
USB device before you start recording.
• USB status indicator blinks in red during USB
recording.
• When the next track is being recorded, it will be shown
on the display.
Basic playback
1
Press [MEMORY].
2
Press [4/9] to start playback.
USB A USB B
1
Press [USB] to select "USB B" or
"USB A PLAY/DUBBING B".
2
Press [4/9] to start playback.
Stop playback Press [8]. "RESUME" is shown.
Press [4/9] to continue playback.
OR
Press [8] two times to stop the
playback fully.
For other operations, refer to "Disc".
Press [8]. "WRITING" is shown.
[USB REC 7/9] during recording.
Press again to continue recording.
Note:
You can pause during recording from
the radio, music port or AUX (except
in SYNCHRO mode). A track mark is
added every time you pause.
19