Tabla De Contenido; Table Of Contents; Safety Information; Warranty - ETI Solid State Lighting 53505111 Guía De Uso Y Cuidado

Table of Contents

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

safety information

CaUTiOn: To reduce the risk of fire, electric shock, or injury
to persons:
□ Use only insulated staples or plastic ties to secure cords;
□ Route and secure cords so that they will not be pinched or
damaged when the cabinet is pushed to the wall;
□ Do not use for recessed installation in ceilings or soffits.
CaUTiOn: The National Electrical Code (NEC) does not
permit cords to be concealed where damage to insulation
may go unnoticed. To prevent fire danger, do not run cord
behind walls, ceilings, soffits, or cabinets where it may
be inaccessible for examination. Cords should be visually
examined periodically and immediately replaced when any
damage is noted.
CaUTiOn: Maximum number of units to be interconnected:
53505111 (32 in. under cabinet light): maximum 18 units
53506111 (42 in. under cabinet light): maximum 14 units
Maximum distance between connected units is 14.5 in.
CaUTiOn: To prevent electric shock, match wide blade of
the plug to the wide slot and fully insert into the electrical
outlet.

Warranty

This product is warranted for a period of 5 years from the date of original purchase against defects in materials and workmanship. If this
product should fail to operate due to defects in material or workmanship within 60 months of purchase, see www.ETiSSL.com for details.
This product will be repaired or replaced, at ETi's option. This warranty is expressly limited to repair or replacement of product, and liability
for direct, incidental, or consequential damages is hereby expressly excluded. Some states do not allow exclusions of direct, incidental or
consequential damages, so the above limitation of exclusion may not apply to you. This warranty gives the consumer specifc legal rights,
which vary from state to state. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS PRODUCT IS MANUFACTURED.
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Power Supply Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Linking Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Beam Adjustment Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Light Distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
nOTiCe: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and the receiver.
□ Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
WarninG: Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
2