Cleaning And Maintenance - Imetec R5701 Manual De Instrucciones

SWITCHING OFF
Turn off the heated mattress cover from the rear of the control by setting the switch to
the off position 'O' (14).
The mattress cover and heating panels can be washed separately. Check the wash
symbol labels on the mattress cover (2) and heating panels (8) for proper washing.
WARNING! Always disconnect the plug from the power
supply and separate the control from the heating panels
before cleaning or maintenance.
BEFORE WASHING
• Disconnect the control cables from the power outlet.
• Press the grip levers on the sides of each control connector to disconnect the connector
of the control (15) from the connector of the heating panel (7).
• Take the heated mattress cover off the bed.
• Separate the press studs of the heating panels (5) from the press studs of the mattress
cover (1) [Fig. E] and remove the two heating panels (4) (6).
WASHING OF THE MATTRESS COVER
CLEANING IN THE WASHING MACHINE
• Wash the mattress cover in the washing machine at 60°C.
DRYING IN THE TUMBLE DRYER
• The mattress cover without panels can be dried in a tumble dryer, using a delicate
cycle, but it must then be spread out in the fresh air to dry it completely.
• Dry the electric blanket in a tumble dryer, at a moderate temperature.
• Remove the mattress cover from the dryer at the end of the drying cycle.
• Then dry the mattress cover completely in the air before use.
• Only apply the heating panels to the mattress cover when the mattress cover is
perfectly dry.
• Do not iron the mattress cover.
WASHING OF HEATING PANELS
CLEANING IN THE WASHING MACHINE
• The heating panels can be machine washed at a maximum washing temperature of

CLEANING AND MAINTENANCE

EN
26