Look E-POST 2 EVO Manuales Del Usuario página 18

EN
INSTALLING A DOUBLE OR AN OVAL RAILED SADDLE
1. Position the saddle on the E-Post 2 EVO,
the rails on the outside of the seatpost.
(Fig.1)
2. Insert the upper support (10) indicated in
Fig 5.1 if you want to use a seatpost with
round rails Ø7mm and the support (10b)
indicated in Fig 5.2 for a saddle with oval
rails. (Fig.2)
3. Then insert the lower support (10c)
under the saddle rails. (Fig.3)
4. Put both lower brackets (11) in place and
tighten the previously greased set screw
to the specified torque of 8Nm once your
seat is properly positioned. (Fig.4)
Ø 7
Ø OVERSIZE
Warning:
The E-POST 2 EVO is not compatible
with oval railed saddles with a rail
height greater than 9.6 mm.
18
Fig 5.1
Fig 5.2
Fig 1
Fig 2
Fig 3
Fig 4