ims PRO GOLD Multi 200-2 Manual Del Usuario página 24

TIG PRO (EURO TORCH)
• Selecting TIG Pro mode (Euro torch)
• Welding current adjustment
• Downslope adjustment
• Post gas adjustment
TIG EASY (VALVE TORCH)
• Entering in TIG EASY mode (valve
torch)
• Welding current adjustment
TIG LIFT WELDING
DC TIG welding requires the use of gas (Argon). Connecting a valve torch will allow to manually adjust the supply of gas and connec-
ting a EURO torch will also offer capability to adjust downslope and post gas settings.
24
GOLD MULTI 200.2 / 200.4 XL / 201.4
Keep button 2 pushed and at the same
time turn the upper knob until «TIG Pro»
is displayed.
Use the upper knob.
Use the lower knob.
Keep button 3 pushed and at the same
time use the upper knob to adjust the
Post Gas.
Keep button 2 pushed and at the same
time turn the upper knob until "TIG
EASY" is displayed.
Use the upper knob.
+
+
+
EN