Confirmation Of Indoor Unit Setup - Toshiba Carrier MMK-AP0077HPUL Manual De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CONFIRMATION OF INDOOR UNIT SETUP

Prior to delivery to the customer, check the address and setup of the indoor unit, which has been installed
in this time and fill the check sheet (Table below). Data of four units can be entered in this check sheet.
Copy this sheet according to the No. of the indoor units. If the installed system is a group control system,
use this sheet by entering each line system into each installation manual attached to the other indoor units.
REQUIREMENT
This check sheet is required for maintenance after installation. Be sure to fill this sheet and then pass this
Installation Manual to the customers.
Indoor unit setup check sheet
Indoor unit
Room name
Model
Check indoor unit address. (For check method, refer to Applicable controls in this sheet.)
* In case of a single system, it is unnecessary to enter the indoor address. (CODE No.: Line [12], Indoor [13], Group [14], Central control [03] )
Line
Indoor
Group
Central control address
Various setup
Have you changed high ceiling setup? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed, respectively.
(For check method, refer to Applicable controls in this sheet.) * In case of replacement of short plugs on indoor microcomputer P.C.
board, setup is automatically changed.
High ceiling setup
(CODE No. [5d])
NO CHANGE
STANDARD
[0000]
HIGH CEILING 1
[0001]
HIGH CEILING 3
[0003]
Have you changed lighting time of filter sign? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed,
respectively.
(For check method, refer to Applicable controls in this sheet.)
Filter sign lighting time
(CODE No. [01])
NO CHANGE
NONE
[0000]
150H
[0001]
2500H
[0002]
5000H
[0003]
10000H
[0004]
Have you changed detected temp. shift value? If not, fill check mark [×] in [NO CHANGE], and fill check mark [×] in [ITEM] if changed,
respectively.
(For check method, refer to Applicable control in this sheet.)
Detected temp. shift value setup
(CODE No. [06])
NO CHANGE
NO SHIFT
[0000]
+1.8°F (+1°C)
[0001]
+3.6°F (+2°C)
[0002]
+5.4°F (+3°C)
[0003]
+7.2°F (+4°C)
[0004]
+9°F
(+5°C)
[0005]
+10.8°F (+6°C)
[0006]
Incorporation of parts sold
separately
Have you incorporated the following parts sold separately? If incorporated, fill check mark [×] in each [ITEM].
(When incorporating, the setup change is necessary in some cases. For setup change method, refer to Installation Manual attached to
each part sold separately.)
Panel
Standard panel
Filter
Super long life filter
Others (
)
Others (
)
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(CODE No. [5d])
NO CHANGE
STANDARD
[0000]
HIGH CEILING 1
[0001]
HIGH CEILING 3
[0003]
Filter sign lighting time
(CODE No. [01])
NO CHANGE
NONE
[0000]
150H
[0001]
2500H
[0002]
5000H
[0003]
10000H
[0004]
Detected temp. shift value setup
(CODE No. [06])
NO CHANGE
NO SHIFT
[0000]
+1.8°F (+1°C)
[0001]
+3.6°F (+2°C)
[0002]
+5.4°F (+3°C)
[0003]
+7.2°F (+4°C)
[0004]
+9°F
(+5°C)
[0005]
+10.8°F (+6°C)
[0006]
Incorporation of parts sold
separately
Panel
Standard panel
Filter
Super long life filter
Others (
)
Others (
)
– 40 –
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(CODE No. [5d])
NO CHANGE
STANDARD
[0000]
HIGH CEILING 1
[0001]
HIGH CEILING 3
[0003]
Filter sign lighting time
(CODE No. [01])
NO CHANGE
NONE
[0000]
150H
[0001]
2500H
[0002]
5000H
[0003]
10000H
[0004]
Detected temp. shift value setup
(CODE No. [06])
NO CHANGE
NO SHIFT
[0000]
+1.8°F (+1°C)
[0001]
+3.6°F (+2°C)
[0002]
+5.4°F (+3°C)
[0003]
+7.2°F (+4°C)
[0004]
+9°F
(+5°C)
[0005]
+10.8°F (+6°C)
[0006]
Incorporation of parts sold
separately
Panel
Standard panel
Filter
Super long life filter
Others (
)
Others (
)
Installation Manual
Indoor unit
Room name
Model
Line
Indoor
Group
Central control address
Various setup
High ceiling setup
(CODE No. [5d])
NO CHANGE
STANDARD
[0000]
HIGH CEILING 1
[0001]
HIGH CEILING 3
[0003]
Filter sign lighting time
(CODE No. [01])
NO CHANGE
NONE
[0000]
150H
[0001]
2500H
[0002]
5000H
[0003]
10000H
[0004]
Detected temp. shift value setup
(CODE No. [06])
NO CHANGE
NO SHIFT
[0000]
+1.8°F (+1°C)
[0001]
+3.6°F (+2°C)
[0002]
+5.4°F (+3°C)
[0003]
+7.2°F (+4°C)
[0004]
+9°F
(+5°C)
[0005]
+10.8°F (+6°C)
[0006]
Incorporation of parts sold
separately
Panel
Standard panel
Filter
Super long life filter
Others (
)
Others (
)
40-EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mmk-ap0097hpulMmk-ap0127hpul

Tabla de contenido