Ingersoll Rand 44SMA Manual De Funcionamiento Y Mantenimiento página 2

FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY.
WARNING
Always wear eye protection
when operating or perform-
ing maintenance on this
tool.
WARNING
Air powered tools can vibrate
in use. Vibration, repetitive
motions or uncomfortable
positions may be harmful to
your hands and arms. Stop
using any tool if discomfort,
tingling feeling or pain occurs.
Seek medical advice before re-
suming use.
WARNING
Keep body stance balanced
and firm. Do not overreach
when operating this tool.
FORWARD/REVERSE OPERATION
The Model 44SMA Drill is capable of operating in a
Forward/Reverse or Forward Only mode of operation.
Make the mode selection prior to starting the tool.
Look at the arrows on the Throttle Sleeve (123). These
arrows indicate the direction in which the Throttle Sleeve
must be rotated to activate either forward or reverse
rotation of the Drill.
Hold the Drill in the normal operating position with the
Throttle Sleeve pointing towards the operator's right hand.
With the Throttle Sleeve in the operator's right hand, pivot
WARNING LABEL IDENTIFICATION
Always wear hearing
protection when operating
this tool.
Do not carry the tool by
the hose.
90 psig
(6.2bar/620kPa)
Operate at 90 psig (6.2 bar/
620 kPa) Maximum air pressure.
ADJUSTMENTS
WARNING
WARNING
WARNING
the Reverse Stop Lever (95) away from the operator. With
the Reverse Stop Lever in this position, the Drill can be
operated in either the forward (clockwise) rotation mode or
reverse (counterclockwise) rotation mode.
Inadvertent movement of the Throttle Sleeve could
cause a sudden change in the direction of rotation of the
Drill.
Pivoting the Reverse Stop Lever toward the operator
prevents the reverse rotation of the Drill and permits the
Drill to be operated in the forward rotation mode only.
2
WARNING
Always turn off the air sup-
ply and disconnect the air
supply hose before instal-
ling, removing or adjusting
any accessory on this tool,
or before performing any
maintenance on this tool.
WARNING
Do not use damaged, frayed
or deteriorated air hoses
and fittings.