Installation - King gates INTRO Serie Instrucciones Y Advertencias Para La Instalación Y El Uso

1
30 60
2
1 Photocell post
2 Pair of opening stops
3 230V line
4 Control panel (electrical panel)
2
400
200
8
325
5 Aerial
6 Flashing light
7 Photocell
8 Box with INTRO actuator
3.3 - Limits of use for the product
Before installing the product, check that the gate panel has dimen-
sions and weight that lie within the limits given in graph 1; also evalu-
ate the climatic conditions (e.g. strong wind) present in the place of
installation: they can greatly reduce the values given in the graph.
Graph 1
900
800
700
600
500
400
300
200
100
0 1
panel max length (m)
3.4 - Set-up for installation
Fig. 2 shows an example of automated plant realised with King gates
components. These components are positioned according to the
typical and usual layout.
With reference to fig. 2, establish the approximate position where
each component envisioned in the plant will be installed and the
most appropriate connection layout.
9
10
11
2 3 4
Vertical electric lock
Key-operated selector switch or digital
keypad
Connector block (not supplied)
5