Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Contents
1. General safety precautions
2. Description of the product
CE Declaration of Conformity
1.
General safety pre-
cautions
1.1 -
Recommendations regarding
safety
• ATTENTION! - This manual contains important instructions
and recommendations regarding the safety of persons. Incor-
rect installation can cause serious injury. Read the manual
completely before starting work. If in doubt, suspend the in-
stallation and request clarifications from the King After-sales
Assistance
.
• ATTENTION! - Important instructions: keep this manual for
any future maintenance interventions and product disposal.
• ATTENTION! - In compliance with the most recent European
Legislation, the realisation of an automatic door or gate must
respect the Standards envisioned by the 2006/42/CE Directive
(ex 98/37/CE) (Machinery Directive) and in particular, the EN
12445; EN 12453; EN 12635 and EN 13241-1 Standards, which
allow to declare conformity of the automation. Considering
this, all product installation, connection, inspection and main-
tenance operations must only be performed by a qualified and
skilled technician!
1.2 -
Recommendations for installation
• Before starting installation, check whether this product is suitable
to automate your gate or door (see chapter 3 and the "Product tech-
nical features"). If it is not suitable, DO NOT proceed with installation.
• All installation and maintenance operations must take place
with the automation disconnected from the electric power in-
put. If the power input disconnection device is not visible from the
place where the automation is positioned, before starting work, affix
a sign onto the disconnection device that states "ATTENTION! MAIN-
TENANCE IN PROGRESS".
• Handle the automation with care during installation, preventing crush-
ing, blows, falls or contact with liquids of any nature. Do not place the
product near to heat sources or expose it to naked flames. All of these
actions can damage it and be cause of malfunctioning or dangerous
1
situations. If this occurs, suspend installation immediately and contact
1
the King After-sales Assistance.
1
• Do not modify any product parts. Unauthorised operations can
only cause malfunctioning. The manufacturer declines liability for
4
damage deriving from arbitrary modifications to the product
4
• If the gate or door to be automated has a pedestrian door the plant
4
must be set up with a control system that prevents functioning of the
5
motor when the pedestrian door is open
5
• The product packaging material must be disposed of in compli-
5
ance with local legislation.
6
2.
Description of the
6
I
product
This product is destined to be used to automate gates or doors with
hinged panels.
ATTENTION! - Any use different to that described and in envi-
ronmental conditions different to those stated in this manual
must be considered improper and prohibited!
The product is an electro-mechanical gear motor, with a 24 Vdc motor.
The gear motor is powered by the external control unit, to which it must
be connected.
If the electric energy is interrupted (black-out), the gate panels can
be moved by releasing the gear motor using the relevant wrench; to
perform the manual manoeuvre, see chapter 8.
Do not use gear motors with incompatible control units.
3.
Installation
3.1 -
Preliminary checks on installation
Before performing installation, check the integrity of the product
components, the adequacy of the model chosen and the suitability
of the environment destined for installation.
IMPORTANT - The gear motor cannot automate a manual
gate that does not have an efficient and safe mechanical
structure. Moreover, it cannot solve defects caused by incor-
rect installation or bad maintenance of the gate itself.
3.2 -
Suitability of the gate to automate
and the surrounding environment
• Check that the gate mechanical structure is suitable to be auto-
mated and complies with the Standards in force on the territory (if
necessary, refer to the data given on the gate label).
• Moving the gate panel manually in Opening and in Closure, check
that the movement takes place with the same and constant friction
in all points of the run (there must not be moments of greater effort).
• Check that the gate panel stays in equilibrium, i.e. that is does not
move if taken manually into any position and left.
• Check that the space around the gear motor allows to manually
release the gate panels easily and safely.
• Envision end run retainers on the ground both for opening and
closure of the gate.
• Check that the gear motor fixing area is compatible with the clear-
ance of the latter (fig. 1).
.
.
1
Publicidad
Capítulos
Tabla de contenido
