ASSEMBLING/USING
TO FOLD
1. Take out mattress base. It is not needed to zip off the second
layer before folding, just take out the mattress and metal tubes.
1
2. To unlock the second lock on the bottom:
(Note: when using the second layer, put your hands through
the hole).
EN
Push down the middle part (2nd lock) with one hand and with
2
the other hand pull onto the red belt until you hear a click to
unlock this part for folding. Than lift up the belt to half height of the playpen.
3. To unlock the top rails
you have to lift up and
push the button (under the
fabric near the arrow) at
3
once and then you have to
bring down the top rail correctly in
one movement. Repeat for all rails
and fold.
4. Pull fully bottom strap and gather four
stands to centre.
4
5. Wrap playpen with mattress base. Fasten Velcro button.
4
5
6. Put playpen into carry bag.
66
14