Lock Function; Monitoring With Guitar Cabinet - Kemper PROFILER STAGE Manual Del Usario

PROFILER STAGE QUICKSTART 17

LOCK FUNCTION

Certain aspects of a Rig can be locked to prevent them changing
when you load another Rig. Find a Rig which features a wah effect,
then select the wah while holding the LOCK button. Now, load a
completely different Rig. As you can see, the wah stays at the
exact position. To unlock a module, hold LOCK and select it.
To display which modules are currently in a locked state, hold the
LOCK button. Any locked modules will remain lit.

MONITORING WITH GUITAR CABINET

This paragraph is for those who want to use an external power
amp to drive a guitar cabinet. Please be aware that, generally
speaking, the sound of a guitar cabinet is different compared to
that of a full-range cabinet, PA, or headphones.
Use a TS cable to connect the upper MONITOR OUTPUT with the
inputs of your external power amp. For stereo use two TS cables
connected to both MONITOR OUTPUTS.
You are using a physical guitar cabinet as your personal monitor.
This means you need to disable the cabinet simulation for the
signal feeding the internal power amp and your physical guitar
cabinet. You do this by pressing OUTPUT.