Kemper PROFILER STAGE Manual Del Usario página 18

18 PROFILER STAGE QUICKSTART
Use the <PAGE> buttons to navigate to the "Output Source" page
and then activate "Monitor Cab Off" with the corresponding soft
button above the display.
If you are using two guitar cabinets, select "Master Stereo" instead
of "Master Mono" as source of the MONITOR OUTPUT.
Use the MASTER VOLUME knob on the front panel to control your
volume.
If you're on stage or in a studio, you won't require a microphone to
pick up your sound, so you should connect the mixing desk to the
MAIN OUTPUTS XLR outs.
In such a scenario, you should unlink the Main Output Volume from
Master Volume, so that you are able to control your Monitor
Volume independently from the level sent to the mixing desk.
Main Out -12 dB Monitor Cab O
OUTPUT Section [Page 1/6]
Output Source
Master Stereo Master Mono Git+Processing Master Stereo
Main Output Monitor Output Direct Output SPDIF Output
Main Out Link Monitor Out Link Direct Out Link Headphone Link
OUTPUT Section [Page 2/6]
Output Volumes
-12.0dB -12.0dB -12.0db
Main Volume Monitor Volume Direct Volume Headphone Vol.
-12.0db