Philips 3100 Serie Manual Del Usario página 29

Problem
The milk does not
froth.
The milk is splashing.
The machine seems to
be leaking.
I cannot activate the
AquaClean filter and
the machine asks for
descaling.
Cause
The brew group is dirty.
The coffee dispensing spout
is dirty.
The machine circuit is
blocked by limescale.
The milk carafe is dirty or not
inserted correctly.
The milk dispensing spout
has not been opened fully.
The milk carafe is
incompletely assembled.
The type of milk used is not
suitable for frothing.
The milk you use is not cold
enough.
The machine uses water to
rinse the internal circuit and
brew group. Some water
flows through the internal
system directly into the drip
tray.
The drip tray is too full and
has overflowed which makes
it look like the machine is
leaking.
The machine is not placed
on a horizontal surface.
The filter has not been
replaced in time after the
AquaClean filter icon flashed
and the capacity dropped to
0%.
Solution
Clean the brew group.
Clean the coffee dispensing spout
and its holes with a needle.
Descale the machine.
Clean the carafe and make sure that
you position and insert it correctly.
Make sure that the milk dispensing
spout is in the correct position.
Make sure that all the components
(especially the milk tube) have been
assembled correctly.
Different types of milk result in
different amounts of froth and
different froth qualities. We have
tested the following milk types which
proved to deliver a good milk froth
result: semi-skimmed or full-fat
cow's milk, soy milk and lactose-free
milk.
Make sure you use cold milk coming
directly from the fridge.
Empty the drip tray when the 'drip
tray full' indicator pops up through
the drip tray cover (Fig. 27). Place a
cup under the dispensing spout to
collect rinsing water.
Empty the drip tray when the 'drip
tray full' indicator pops up through
the drip tray cover (Fig. 27). Place a
cup under the dispensing spout to
collect rinsing water.
Place the machine on a horizontal
surface so that the 'drip tray full'
indicator works properly.
Descale your machine first and then
install the AquaClean filter.
English
29